Products
SEMICONDUCTOR EQUIPMENTS
Solvent Recyclers (continuous type)
A distillation regeneration system is that vaporizes waste solvent and liquefies it again for recovery.
Continuous type: the amount of waste solvent generates 30~250L/ day
The amount of the residues which is occurred by the distillation is small, even if the residues are liquid or solid.
(Continuous type is capable for automatic operation. Can be used continuously)
- Explosion-proof certification of IEC International Standard
Suitable for IEC 60079 series explosion-proof structuroperatione- Compact designs
- Fine temperature setting is possible
The distillation temperature can be set the range of 50 to 200 degrees by 1 degree. Also, the heater output can be adjusted.
It is possible to support wider ranges of solvent regeneration.- Easy to operate
Automatic operation is possible by simply pressing the bottom on the computer panel.- Built-in diaphragm pump
This device has a built-in air-driven diastema pump
It is possible to automatically transfer waste solvent into the distillation tank.
(A timer for pump operation is attached to the top of the operation panel.)- Easy to clean up
The manual drain is equipped at the bottom of the distillation tank.
Liquid sludge remaining after the regeneration work can be easily removed.
If the sludge solidifies, please clean it by using a liner bag (heat resistant nylon bag).<Recyclable solvent>
- Hydrocarbon solvents: toluene, xylene, etc.
- Alcohol solvents: methanol, ethanol, butanol, IPA, NMP, etc.
- Ketone solvents: acetone, MEK, etc.
- Ester solvents: butyl acetate, ethyl acetate, etc.
- Bromine solvent
- Fluorine-based solvent
- Chlorine solvent